'Download' the Firmware


DOWNLOAD S8100-ZA Firmware V1.12 (Zip File)


DOWNLOAD S8100-ZC Firmware V1.19 (Zip File)


NOTE: If you're having issues downloading the Firmware from the Website, try right-click and "Save Target As" or try another Internet Browser.


How to 'Update' the Firmware (via USB)


Step 1: Download the Zip File

  • Please download the Zip File linked above, and follow the instructions below to update your S8100.
  • Once downloaded, extract the contents of the Zip File directly onto a USB Flash Drive.
  • Insert the USB Flash Drive into the USB Port on the S8100.


Step 2: Open the Menu

  • Press the MENU button on the Remote Control.
  • Select Admin → USB Software Upgrade.
  • Use the ◀ ▶ ▼ ▲ buttons on the Remote to navigate the Menu.



Step 3: Update the Firmware

  • Select USB Software Upgrade, press OK.
  • Enter the PIN (Default PIN is 0000), when prompted "Password Please".



Step 4: Update Complete

  • The S8100 will search the connected USB Flash Drive, and begin updating the Firmware, if found.
  • Once the Firmware Update has completed, the S8100 will reboot, and return to Live TV.
  • Remove the USB Flash Drive.



NOTE: If the Software Update takes less than one minute to complete, the S8100 has been unable to detect the file on your USB Flash Drive. Ensure you extract the contents of the Zip File, the Software Update is NOT the Zip File.


How to 'Update' the Firmware (via Network)


Step 1: Connect to the Network

  • Connect an Ethernet Cable from the Router to the S8100, or connect via Wi-Fi.
  • Press the MENU button on the Remote Control.
  • Select Settings → Network Setup.
  • Press the ▼ ▲  buttons on the Remote to toggle between Ethernet and W-Fi.



Step 2: Open the Menu

  • Press the MENU button on the Remote Control.
  • Select Admin → Network Software Upgrade.
  • Use the ◀ ▶ ▼ ▲ buttons on the Remote to navigate the Menu.



Step 3: Update Complete

  • The S8100 will perform a Software Search on the Network, and begin updating the Firmware, if found.
  • Once the Firmware Update has completed, the S8100 will reboot, and return to Live TV.



NOTE: Upon connecting to the Network in Step 1, the S8100 may immediately see the Software Update, where the S8100 will skip Step 2.