'Download' the Firmware


DOWNLOAD T2100 Firmware V1.43 (USB File)


NOTE: If you're having issues downloading the Firmware from the Website, try right-click and "Save Target As" or try another Internet Browser.


How to 'Update' the Firmware (via USB)


Step 1: Download the Zip File

  • Please download the Zip File linked above, and follow the instructions below to update your T2100.
  • Once downloaded, extract the contents of the Zip File directly onto a USB Flash Drive.
  • Insert the USB Flash Drive into the USB Port on the T2100.


Step 2: Open the Menu

  • Press the MENU button on the Remote Control.
  • Select Admin → USB Software Upgrade.
  • Use the ◀ ▶ ▼ ▲ buttons on the Remote to navigate the Menu.



Step 3: Update the Firmware

  • Select USB Software Upgrade, press OK.
  • Enter the PIN (Default PIN is 0000), when prompted "Password Please".



Step 4: Update Complete

  • The T2100 will search the connected USB Flash Drive, and begin updating the Firmware, if found.
  • Once the Firmware Update has completed, the T2100 will reboot, and return to Live TV.
  • Remove the USB Flash Drive.



NOTE: If the Firmware Update takes less than one minute to complete, the T2100 has been unable to detect the file on your USB Flash Drive. Try copy the file onto your USB Flash Drive again, or redownload the Firmware Update.


How to 'Update' the Firmware (via Network)


Step 1: Connect to the Network

  • Connect an Ethernet Cable from the Router to the T2100, or connect via Wi-Fi.
  • Press the MENU button on the Remote Control.
  • Select Settings → Network Setup.
  • Press the ▼ ▲  buttons on the Remote to toggle between Ethernet and W-Fi.



Step 2: Open the Menu

  • Press the MENU button on the Remote Control.
  • Select Admin → Network Software Upgrade.
  • Use the ◀ ▶ ▼ ▲ buttons on the Remote to navigate the Menu.



Step 3: Update Complete

  • The T2100 will perform a Software Search on the Network, and begin updating the Firmware, if found.
  • Once the Firmware Update has completed, the T2100 will reboot, and return to Live TV.



NOTE: Upon connecting to the Network in Step 1, the T2100 may immediately see the Firmware Update, where the T2100 will skip Step 2.