'Download' the Channel Data


DOWNLOAD S9040DVD Channel Data (Zip File)


NOTE: Channel Data was last updated 05/2023.


How to 'Update' the Channel Data


Step 1: Download the Zip File

  • Download the Zip File linked above, then extract the contents onto a USB Flash Drive.
  • Insert the USB Flash Drive into the USB Port on the Front of the S9040DVD.


Step 2: Open the Main Menu

  • With the Remote, go to Menu (Setup) > Channel Search > DB Management.
  • Use the ◀ ▶ ▼ ▲ buttons on the Remote to navigate the Main Menu.



Step 3: Load the Channel Data

  • Select "Load from USB" in the DB Management Menu, press OK.
  • Select the Channel Data file that corresponds to your LNB Frequency: 10750 MHz, or 11300 MHz.
  • The S9040DVD will display "Load Database Successfully". Press EXIT to return to Live TV.



NOTE: You can check your LNB Frequency, under Menu (Setup) > Channel Search > Satellite Setup. Highlight "Optus D1", on the right-hand side you'll see "LNB Type", with the LNB Frequency: 10750 MHz, or 11300 MHz.