'How to' OTA Update the SAT1


Step 1: Confirm the Software Update

  • Select YES, if you want to Update Now.
  • Select NO, if you would like to return to Live TV, and Update Later.



Step 2: Download the Software Update

  • The SAT1 will search the Satellite Broadcast, and begin downloading the Software.
  • It should take approx. 2-3 Minutes to download the Software.



Step 3: Update Complete 

  • Once the Software Update has completed, the SAT1 will Reset/Reboot, and return to Live TV.




NOTE: If the SAT1 displays "No Signal - Check your Cable/Satellite Dish" after the Software Update, the SAT1 may require a Factory Reset, and re-tune of the Channels.


'How to' Factory Reset the SAT1


Step 1: Open the Main Menu

  • With the Remote, go to Menu > Installation > Factory Reset.
  • Use the ◀ ▶ ▼ ▲ buttons on the Remote to navigate the Main Menu.



Step 2: Confirm the Factory Reset

  • Select YES, if you want to reset all information on the SAT1.
  • Select NO, if you would like to return to the Main Menu.



Step 3: Enter the PIN

  • Use the NUMERIC buttons on the Remote to enter the PIN. Default is "0000".
  • The SAT1 will then Reset/Reboot, and return to the "Welcome" Screen.
  • Follow the on-screen prompts to re-tune the Channels.




NOTE: By performing a Factory Reset, you understand that all user configured settings and information will be cleared.